Troubleshooting
Pool Robot Keeps Getting Stuck? Causes and Fixes by Spot
Robots usually get stuck in the same few places: the main drain, steps, ladders, corners and slopes. Find where yours stops, then use the matching fix.
Published
Fix your pool robot
Step-by-step fixes for robots that stop climbing, get stuck, won’t charge or flash error lights, for every major brand.
All fix your pool robot
Wybot fix
WYBOT Not Charging? Fixes From WYBOT's Own Guides
WYBOT charging problems usually come from a wet port, dirty contacts, a robot left switched on, or a faulty adapter. Work through these steps before contacting support.
Published
Beatbot fix
Beatbot Won't Turn On or Charge? Step-by-Step Fixes
A Beatbot that won't start is usually low on charge, not charging properly, or needs a restart. Beatbot's help center explains the lights and how to test the dock.
Published
Aiper fix
Aiper Not Charging? How to Find the Cause and Fix It
Most Aiper charging problems are the charger, wet or dirty contacts, or a battery worn by long storage. Here's how to tell which, using Aiper's own support guides.
Published
Aiper fix
Aiper Red Light: What It Means and How to Fix It
A red light on an Aiper can mean normal charging, a jammed pump or a battery warning. Here's how to tell which, based on Aiper's own support guides, and what to do about each.
Published
Troubleshooting
Robotic Pool Cleaner Not Climbing Walls? 7 Fixes That Work
Most robots that stop climbing have a full filter, a slippery wall or worn brushes. Work through these checks in order, from the 2-minute fixes to the ones that need parts.
Published
Not sure which robot fits your pool?
Answer five quick questions and see the models that match your pool type, size and budget.